200watts/channel RMS Powered Mixer

PHONIC POWER POD 740

Built-in 200W + 200W/4 ohms amplifier which

can be selected as Main+Main, Main+Monitor or

Main only (bridged operation, 400W/8 Ohms)

4 digital effects

7 input channels compatible with mic /line level

(channels 5-7 accept stereo line inputs)

3-band EQ on each input channel

Dual 7-band graphic equalizers

Effect out and Aux in

+48V phantom power

Tape in and out (via RCA/phono connectors)

allows for connection of a tape/CD player

without taking up a main input channel

2 built-in limiters prevent excessive input levels

to amp modules

Specifications

Maximum Voltage Gain (Pad: Off):

86d B Ch In (Lo-Z) to Power Amp Out (Ch1-4)

66d B Ch In (Lo-Z) to Main Out, Monitor Out (Ch1-4)

72d B Ch In (Lo-Z) to Effect Out (Ch1-4)

50d B Ch In (Lo-Z) t Rec Out (Ch1-4)

54d B Ch In (Lo-Z) to Main Out, Monitor Out (Ch1-4)

25d B Aux In to Main Out

26d B Tape In to Main Out

73d B Mic In to Main Out, Monitor Out (Ch5-7)

28d B Line In to Main Out, Monitor Out (Ch5-7)

Input Channel Equalization:

+ 15dB Maximum High:12kHz (shelving) Mid:2.5kHz (peaking) Low:80Hz (shelving)

Frequency Response:

20Hz-20kHz+1d B, -3d B @ 1W output into 8 ohms (Power Amp Out) 20Hz-20kHz+1d B,

-3d B @+4d B output into 10kohms (Main Out, Monitor Out, Effect Send)

Maximum Output Power:

2X200W/4 ohms @0.5% THD at 1KHz

Total Harmonic Distortion:

<0.3% @ 20Hz-20kHz, 100W output into 4 ohms (Power Amp Out) <0.3% @

20Hz-20kHz, +14d Bu output into 10kohms (Main Out, Monitor Out, Effect Send)

Hum & Noise (Average, Rs=150!! ) (Weighting: I.H.F-A.):

-122d Bm equivalent input noise, -63d Bm residual

output noise(Power Amp Out)

 -78dBm residual output noise (Main out, Monitor Out, Effect Send)

 -73dBm (77dB S/N) Main Out, Monitor Out , All channel level controls at minimum

-40dBm (44dB S/N) Main Out, Monitor Out , One channel level control at maximum

-74dBu (78d'b S/N) Effect Send, All channel level controls at minimum

-34dBu (38dB S/N) Effect Send, One channel level control at maximum

Crosstalk at 1kHz:

63dB adjacent input, 63dB input to output

Graphic Equalizer:

7 bands (60, 120, 360, 1k, 2.5k, 7k, 16k Hz) + 12 dB Maximum

Internal Digital Effect:

4 types (Digital Delay, Vocal, L.Hall, S.Hall)

Phantom Power:

+48V is supplied to electrically balanced inputs for powering condenser microphones via 6.8k

ohm current limiting/ isolation resisters.

Limiter LED On:

Output Level: 36dB

Foot Switch:

Digital Effect Mute: on/off

Power consumption:

200 Watts

Dimensions (WxHxD):

47 x 27 x 28 cm

  Weight:

15.6 kg

Since its introduction in 1998, the Powerpod740 (previously called Powerpod7) has proved to be an

excellent choice for musicians and venues alike. The Powerpod740 offers power and flexibility that

can withstand 'life on the road'. Two separate 200 Watt amplifiers enable the user to configure the

output in three different ways, either Main + Main, Main + Monitor or Main only (Bridged operation,

400W). The Powerpod740 has all the patching necessary to connect you to more amplifiers and an

external processor or to accept more inputs via another mixer when circumstances require.